[BUGS] freebsd ethernet traffic load
jonathan michaels
jlm at caamora.com.au
Thu Nov 8 00:12:49 EST 2007
On Wed, Nov 07, 2007 at 10:16:11PM +1100, Edwin Groothuis wrote:
> On Wed, Nov 07, 2007 at 08:33:23PM +1100, jonathan michaels wrote:
> > -----Forwarded message from Charlie Root <@gw>-----
> > Network interface status:
> > Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
> > de0 1500 <Link#1> 00:00:e8:XX:XX:XX 4593322 0 4779269 0 179288
>
> Can you also give the output of "ifconfig de0" ?
just for good measure ...
[X at gw ~]$ ifconfig
de0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet XXX.X.XXX.1 netmask 0xfffffff0 broadcast XXX.X.XXX.15
ether 00:00:e8:XX:XX:XX
media: Ethernet autoselect (10baseT/UTP)
status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33208
tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500
inet XXX.XXX.XX.237 --> XXX.XXX.XX.129 netmask 0xffffffff
Opened by PID 370
[X at gw ~]$
regards (and thanks edwin)
jonathan
--
================================================================
powered by ..
QNX, OS9 and freeBSD -- http://caamora com au/operating system
==== === appropriate solution in an inappropriate world === ====
More information about the BUGS
mailing list